Extruded and Machined Magnesium Components
Luxfer MEL Technologies unique range of extruded magnesium products enable; lighter, stronger, safer and higher performance designs.
Luxfer MEL Technologies is able to provide highly customised engineering solutions to our markets and customers through a dedicated 2,750t hydraulic extrusion press. Luxfer MEL Technologies is able to manufacture custom round bars, profiles and solid or hollow shapes.
Lightest Structural Metal
With a density of 1.8gcm3, by volume magnesium is 30% lighter than aluminium and 75% lighter than steel.
High Specific Stiffness
For bars with equivalent weight and width, magnesium is 18 times stiffer than steel and double that of aluminium. In practice it is not always possible to increase section thickness to these extents. But with only small increases in cross section it is not possible to redesign parts that offer 20-25% weight savings over aluminium equivalents and 65-70% weight savings when substituting steel designs.
Magnesium alloys can be shaped into plate by rolling and extruded into both solid and hollow profiles. These can be further shaped using forging, pressing, bending or simply machining from solid.
Magnesium alloys are the easiest of all structural metals to machine.
- Low power consumption (45% less than aluminium)
- Fast machining rate (55%)
- Excellent surface finish
- Reduced tool wear
- Well broken chips
Alloys are available that have comparable properties with other structural metals – with the added advantage of superior performance at elevated temperatures (good creep resistance and tensile strength).
Has inherent screening properties, useful for electronic enclosures and has good thermal conductivity for heat dissipation.
Magnesium alloys have excellent vibration damping properties.
Modern alloys have good corrosion resistance. For more severe environments there are a range of surface passivation and top coat treatments commercially available.
Our flagship high performance alloy designed for the most demanding applications. This rare earth containing alloy exhibits isotropic high strength with excellent corrosion resistance while being 33% lighter than typical aluminium alloys. Available off the shelf as bar stock or customised extrusions.
This rare earth containing alloy exhibits isotropic high strength with excellent corrosion resistance while being 33% lighter than typical aluminium alloys.